How To | Use an outboard processor/fx unit with the TouchMix.
Learn how to use an outboard processor/FX unit with the Touchmix and explore whether an FX loop is necessary.
Procedure
Yes! If you have an fx unit you wish to use in addition to what is on the Touchmix then you will need to make sure you to do the following:
- Make sure you have an open AUX output and Mic/Line input on the mixer.
- Make sure you have the correct cabling for input output routing from your FX/Processor to the Touchmix.
- Route signal from aux to open channel making sure we have optimum gain and leveling.
- Blend signal from Non-Effected signal vs Effected signal. or remove Non-effected signal from the main mix and bring the Effected signal up on your channel.
This will give you more options if you need more FX or processing for vocals or instrumentation.