Troubleshooting | K.2 Loudspeaker Does Not Reproduce Low Frequencies
Gain an understanding of the steps required to troubleshoot a K.2 Loudspeaker that does not reproduce low frequencies.
Affected Products
| Hardware Model/Series | K.2 Loudspeaker |
| Software |
|
Problem
Loudspeaker passes audio, but produces a low frequency output.
Solution | Workaround
Verify the following:
- The loudspeaker is receiving a full range audio signal. If another loudspeaker is available, use it to check the audio signal.
- Reset the loudspeaker to factory default settings by navigating to Settings > Factory Reset on the Menu.
After verifying, is the problem still present?
No
You may have had the EQ engaged in the loudspeaker DSP.